Caller Id Call Return - NEC Xen IPK Features & Specifications Manual

Caller ID Call Return

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
The Caller ID Call Return feature allows the voice mail system to use Caller
ID information captured with the message to call and connect the person
that left the message with the voice mail user that is checking messages.
After the call is ended by either party, the voice mail user returns to
checking messages.
Terminal Type:
All Multiline terminals and Single Line telephones.
Required Components:
VMS(2)/(4)/(8)-U( ) ETU or FMS(2)/(4)-U( ) ETU.
Caller ID Information Operation on non-display Multiline telephone
or Single Line telephone:
1. Dial the XenMail extension.
2. After message playback, XenMail prompts to hear Caller ID
number only.
K
Dial during message to stop playback, save the current message
as an old message, and hear Caller ID number only.
3. When Caller ID information is available after the Caller ID number is
played, the system prompts the mailbox user with an option to return
the call.
During message playback dial
Note:
To repeat the Caller ID number during its playback, dial
end of the Caller ID number dial
4. To end a Return Call, dial
disconnect the outside call.
- OR -
- OR -
LK.
J
.
LKJ
to return to the mailbox and
C-5
L
. To skip to the
C5 – 145