Configurate Switch Ip Addresses; Switch Ip Addresses Configuration Task List - Edge-Core ES4624-SFP Basic Management Manual

{<protocol-type> |discard |all}][detail]
no debug driver {receive |send}
Function: Turn on the on-off of showing the information of the CPU receiving or sending
packets, the "no debug driver {receive |send}" command turn off the on-off.
Parameter: receive|send show the information of receiving or sending packets;
interface {<interface-list>|all}:interface-list is the Ethernet port number, all indicate all
the Ethernet ports.
protocol {<protocol-type>|discard |all}：protocol-type is the type of the protocol of the
packet，including snmp、telnet、http、dhcp、igmp、hsrp、arp、bgp、rip、ospf、pim、
ssh、 vrrp、 ripng、 ospfv3、 pimv6、 icmpv6、 bgp4plus、 unknown-mcast、 unknown-mcast6、
ttl0-2cpu、isis、dot1x、gvrp、stp、lacp、cluster、mld、vrrpv3、ra、uldp、lldp、eapou; all
means all of the protocol types, discard means all the discarded packets.
Detail show detail information.
Command Mode: Admin Mode
Usage Guide: This command is used to debug, it is supposed to be used with the help of
the technical support.
Example：Turn on the on-off for showing the receiving packets.
Switch#debug driver receive

2.5 Configurate Switch IP Addresses

All Ethernet ports of ES4624-SFP/ES4626-SFP switch is default to Data Link layer
ports and perform layer 2 forwarding. VLAN interface represent a Layer 3 interface
function which can be assigned an IP address, which is also the IP address of the switch.
All VLAN interface related configuration commands can be configured under VLAN Mode.
ES4624-SFP/ES4626-SFP switch provides three IP address configuration methods:
Manual
BOOTP
DHCP
Manual configuration of IP address is assign an IP address manually for the switch.
In BOOTP/DHCP mode, the switch operates as a BOOTP/DHCP client, send
broadcast packets of BOOTPRequest to the BOOTP/DHCP servers, and the
BOOTP/DHCP servers assign the address on receiving the request. In addition,
ES4624-SFP/ES4626-SFP switch can act as a DHCP server, and dynamically assign
network parameters such as IP addresses, gateway addresses and DNS server
addresses to DHCP clients DHCP Server configuration is detailed in later chapters.

2.5.1 Switch IP Addresses Configuration Task List

89