Cluster Administration Troubleshooting; Cluster Debugging And Monitoring Command - Edge-Core ES4624-SFP Basic Management Manual

Switch(config)#cluster run
Switch(config)#cluster ip-pool 10.254.254.30
Switch(config)#cluster commander 5526
Switch(config)#cluster auto-add
2. Configure the member switch
Configuration of SwitchB-SwitchD
Switch(config)#cluster run

30.5 Cluster Administration Troubleshooting

30.5.1 Cluster Debugging and Monitoring Command

30.5.1.1 show cluster
Command: show cluster
Function: Display cluster information of the switch.
Command Mode: Admin and Config Mode
Example: Execute this command on switches of different roles.
----in a commander----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: commander
IP pool: 10.254.254.1
Cluster name: MIS_zebra
Keepalive interval: 30
Keepalive loss-count: 3
Auto add: Disabled
Number of Members: 0
Number of Candidates: 3
----in a member ----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: Member
624