Edge-Core ES4624-SFP Basic Management Manual page 346

Usage Guide: In the Admin mode, this command can show the parameters of the MSTP
configuration such as MSTP name, revision, VLAN and instance mapping.
Example: Display the configuration of the MSTP on the switch.
Switch#show spanning-tree mst config
Name switch
Revision 0
Instance Vlans Mapped
----------------------------------
00 1-29, 31-39, 41-4094
03 30
04 40
----------------------------------
11.5.1.3 show mst-pending
Command: show mst-pending
Function: In the MSTP region mode, display the configuration of the current MSTP
region.
Command mode: MSTP Region Mode
Usage Guide: In the MSTP region mode, display the configuration of the current MSTP
region such as MSTP name, revision, VLAN and instance mapping.
Note: Before quitting the MSTP region mode, the displayed parameters may not be
effective.
Example: Display the configuration of the current MSTP region.
Switch(config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#show mst-pending
Name switch
Revision 0
Instance Vlans Mapped
----------------------------------
00 1-29, 31-39, 41-4093
03 30
04 40
05 4094
----------------------------------
Switch(Config-Mstp-Region)#
11.5.1.4 debug spanning-tree
346