Edge-Core ES4624-SFP Basic Management Manual page 120

running-config
startup-config
nos.img
nos.rom
Command Mode: Admin Mode
Usage Guide: This command supports command line hints,namely if the user can enter
commands in following forms: copy <filename> tftp:// or copy tftp:// <filename> and
press Enter,following hints will be provided by the system：
tftp server ip/ipv6 address[x.x.x.x]/[x:x::x:x]>
tftp filename>
Requesting for TFTP server address, file name
Example:
（1）Save images in the FLASH to the TFTP server of 2004:1:2:3::6
Switch#copy nos.img tftp:// 2004:1:2:3::6/ nos.img
（2）Obtain system file nos.img from the TFTP server 2004:1:2:3::6
Switch#copy tftp:// 2004:1:2:3::6/nos.img nos.img
（3）Save running configuration files
Switch#copy running-config startup-config
2.7.3.2.2.3 ftp-dir
Command: ftp-dir <ftp-server-url>
Function: Browse the file list on the FTP server.
Parameter:
ftp://<username>:<password>@{<ipv4address>|<ipv6address>},amongst <username> is
the FTP user
{<ipv4address>|<ipv6address>} is the IPv4 or IPv6 address of the FTP server.
Command Mode: Admin Mode
Example: Browse the list of the files on the server with the FTP client
Switch#ftp-dir ftp://user:password@IPv6 Address.
2.7.3.2.2.4 ftp-server enable
Command: ftp-server enable
no ftp-server enable
Function: Start FTP server, the "no ftp-server enable" command shuts down FTP
server and prevents FTP user from logging in.
Running configuration files
It means the reboot configuration files when using copy
running-config startup-config command
System files
System startup files
The form
name,
<password>
of
<ftp-server-url>
is the FTP
120
is:
user password,