Commands For Igmp Snooping; Ip Igmp Snooping; Ip Igmp Snooping Proxy - Edge-Core ES4624-SFP Basic Management Manual

static-group <A.B.C.D>
<A.B.C.D>] interface
port-channel] <IFNAME>
no ip igmp snooping vlan <vlan-id>
static-group <A.B.C.D>
<A.B.C.D>] interface
port-channel] <IFNAME>
ip igmp snooping vlan <vlan-id> report
souce-address <A.B.C.D>
no ip igmp snooping vlan <vlan-id>
report source-address
ip igmp snooping
specific-query-mrsp <value>
no ip igmp snooping vlan <vlan-id>
specific-query-mrspt

26.3 Commands for IGMP Snooping

26.3.1 ip igmp snooping

Command: ip igmp snooping
no ip igmp snooping
Function: Enable the IGMP Snooping function: the "no ip igmp snooping" command
disables this function.
Command mode: Global Mode
Default: IGMP Snooping is disabled by default.
Usage Guide: Use this command to enable IGMP Snooping, that is permission every
vlan config the function of IGMP snooping. the "no ip igmp snooping" command
disables this function.
Example: Enable IGMP Snooping.
Switch (config) # ip igmp snooping

26.3.2 ip igmp snooping proxy

Command: ip igmp snooping proxy
the vlan. The no form of the command
[source
cancels this configuration.
[ethernet |
[source
[ethernet |
Configure forward report source-address
for IGMP, the "no ip igmp snooping vlan
<vlan-id>
command restores the default setting.
vlan <vlan-id>
Configure the maximum query response
time of the specific group or source, the no
command restores the default value.
560
report source-address"