Lldp Function Commands; Lldp Enable; Lldp Enable(Port) - Edge-Core ES4624-SFP Basic Management Manual

debug lldp packets interface ethernet
<IFNAME>
no debug lldp
ethernet <IFNAME>
Port mode
clear lldp remote-table

7.3 LLDP Function Commands

7.3.1 lldp enable

Command：lldp enable
lldp disable
Function：Globally enable LLDP function; disable command globally disables LLDP
function.
Parameters：None.
Default：Disable LLDP functions.
Command Mode：Global mode.
Usage Guide: If LLDP function is globally enabled, it will be enabled on every port.
Example：Enable LLDP function on the switch.
Switch(config)#lldp enable

7.3.2 lldp enable(Port)

Command：lldp enable
lldp disable
Function：Enable the LLDP function module of ports in port configuration mode; disable
command will disable the LLDP function module of ports.
Parameters：None.
Default：The LLDP function module of ports is enabled by default in port configuration
mode.
Command Mode：Port configuration mode
Usage Guide：When LLDP is globally enabled, it will be enabled on every port. The
switch on a port is used to disable this function when it is unnecessary on the port.
Example：Disable LLDP function of port on the port ethernet 1/5 of the switch.
Switch(config)#in ethernet 1/5
packets interface
Enable or disable
packet-receiving and sending function in
port or global mode.
Clear Remote-table of the port.
228
the DEBUG