Debug Ntp Sync; Ntp Access-Group - Edge-Core ES4624-SFP Basic Management Manual

Command: debug ntp packets [send | receive]
no debug ntp packets [send | receive]
Function: To enable/disable the debug switch of displaying NTP packets information.
Parameter: send：The debug switch of sending ntp packets.
receive：The debug switch of receiving ntp packets.
If there is no parameter, that means enable the sending and receiving switch of
ntp packets in the same time.
Default: Disabled.
Command Mode: Admin Mode.
Usage Guide: None.
Example: To enable the debug switch of displaying NTP packets information.
Switch(config)#debug ntp packets

19.3.6 debug ntp sync

Command: debug ntp sync
no debug ntp sync
Function: To enable/disable debug switch of displaying local time synchronization
information.
Parameter: None.
Default: Disabled.
Command Mode: Admin Mode.
Usage Guide: None.
Example: To enable debug switch of displaying local time synchronization information.
Switch(config)#debug ntp sync

19.3.7 ntp access-group

Command: ntp access-group server <acl>
no ntp access-group server <acl>
Function: To configure the access control list of NTP Server. The no command is to
delete the access control list of NTP service.
Parameter: acl: ACL number, ranger between 1 to 99.
Default: Disabled.
Command Mode: Global Mode.
510