Edge-Core ES4624-SFP Basic Management Manual page 367

Usage Guide: When there is more than one tunnel in the system, configuring description
will help user with identifying the purposes of different tunnels.
Examples: Set the tunnel description as toCernet2.
Switch(Config-if-Tunnel1)#description toCernet2
13.2.2.3.1.2 ipv6 address
Command：ipv6 address <ipv6-address/prefix-length> [eui-64]
no ipv6 address <ipv6-address/prefix-length> [eui-64]
Function： Configure agregatable global unicast address, site-local address and link-local
address for the interface
Parameter ： Parameter <ipv6-address> is the prefix of IPv6 address, parameter
<prefix-length> is the prefix length of IPv6 address, which is between 3-128, eui-64
means IPv6 address is generated automatically based on eui64 interface identifier of the
interface
Command Mode：Interface Configuration Mode
Default： None
Usage Guide：IPv6 address prefix can not be multicast address or any other specific
IPv6 address, and different layer 3 interfaces can not configure the same address prefix.
For global unicast address, the length of the prefix must be greater than or equal to 3.
For site-local address and link-local address, the length of the prefix must be greater than
or equal to 10.
Example ： Configure an IPv6 address on Vlan1 Layer 3 interface: the prefix is
2001:3f:ed8::99 and the length of the prefix is 64
Switch(Config-if-Vlan1)#ipv6 address 2001:3f:ed8::99/64
13.2.2.3.1.3 ipv6 route
Command ： [no]
<interface-type
interface-number>} | tunnel <tunnel no>} [<precedence>]
Function：Set IPv6 static route
Parameters：Parameter <ipv6-prefix> is the destination prefix of IPv6 static route,
parameter <prefix-length> is the length of IPv6 prefix, parameter <ipv6-address> is the
next hop IPv6 address of the reachable network, parameter <interface-type
interface-number> is the name of interface from which to reach the destination,
parameter <tunnel no> is the exit tunnel No. of tunnel route, parameter <precedence>
is the weight of this route, the range is 1-255, the default is 1
Default：There is not any IPv6 static route which is configured by default.
Command Mode：Global Mode
ipv6 route <ipv6-prefix/prefix-length>
interface-number> | {<ipv6-address>
367
{<ipv6-address> |
<interface-type