Edge-Core ES4624-SFP Basic Management Manual page 496

The flag explanation of the binding state:
S The static binding is configured by shell command
D The dynamic binding type
U The binding is uploaded to the server
R The static binding is configured by the server
O DHCP response with the option82
L The hardware drive is announced by the binding
X Announcing dot1x module is successful
E Announcing dot1x module is failing
17.2.2.27 show trustview status
Command: show trustview status
Function: To show all kinds of private packets state information, which sending or
receiving from TrustView (inter security management background system).
Parameter: None.
Command Mode: Admin and global configuration mode
Default: Disabled.
Usage Guide: This command can be used for debugging the communication messages
between the switch and the TrustView server. Messages such as protocol version
notification, encryption negotiation, free resource and web URL redirection, and the
number of forced log-off messages, as well as the number of forced accounting update
messages, can be displayed.
Example:
Switch#show trustview status
Primary TrustView Server 200.101.0.9:9119
TrustView version2 message inform successed
TrustView inform free resource successed
TrustView inform web redirect address successed
TrustView inform user binding data successed
TrustView version2 message encrypt/digest enabled
Key: 08:02:33:34:35:36:37:38
Rcvd 106 encrypted messages, in which MD5-error 0 messages, DES-error 0 messages
Sent 106 encrypted messages
Free resource is 200.101.0.9/255.255.255.255
Web redirect address for unauthencated users is <http://200.101.0.9:8080>
Rcvd 0 force log-off packets
Rcvd 19 force accounting update packets
496