Edge-Core ES4624-SFP Basic Management Manual page 309

2. Lock the MAC addresses for a port
Command
Port mode
port-security lock
no port-security lock
port-security convert
port-security timeout <value>
no port-security timeout
port-security
<mac-address>
no port-security
<mac-address>
Admin Mode
clear port-security dynamic [address
<mac-addr> | interface <interface-id>]
3. MAC address binding property configuration
Command
Port mode
port-security maximum <value>
no port-security maximum <value>
port-security violation
shutdown} [recovery <30-3600>]
no port-security violation
4. mac-notification trap configuration
Command
Global Mode
mac-address-table
periodic-monitor-time <5-86400>
Explanation
Lock the port,when a port is locked, the
MAC address learning function will be
disabled.the "no port-security lock"
command restores the MAC address
learning function for the port.
Convert
addresses learned by the port to static
secure MAC addresses.
Enable port locking timer function; the
"no port-security timeout" restores the
default setting.
Add static secure MAC address;
mac-address
"no
command deletes static secure MAC
mac-address
address.
Clear dynamic MAC addresses learned
by the specified port.
Explanation
Set the maximum number of secure
MAC addresses for a port; the "no
port-security
restores the default value.
Set the violation mode for the port; the
{protect |
"no port-security violation" command
restores the default setting.
Explanation
Set the MAC monitor interval to count
the added and deleted MAC in time, and
send out them with trap message.
309
dynamic secure
port-security mac-address"
maximum"
MAC
the
command