Ipv6 Vrrpv3 Configuration Commands; Advertisement-Interval - Edge-Core ES4624-SFP Basic Management Manual

virtual-ipv6 <ipv6-address> interface
{Vlan <ID> | IFNAME }
no virtual-ipv6 interface
3. Configure the VRRPv3 advertisement interval
Command
VRRPv3 protocol mode
enable
disable
4. Configure the monitor interface of VRRPv3
(1 ) Configure VRRPv3 preempt mode
Command
VRRPv3 protocol mode
preempt-mode {true| false}
( 2 ) Configure VRRPv3 priority
Command
VRRPv3 protocol mode
priority < priority >
( 3 ) Configure the VRRPv3 advertisement interval
Command
VRRPv3 protocol mode
advertisement-interval <time>
(4 ) Configure the monitor interface of VRRPv3
Command
VRRPv3 protocol mode
circuit-failover {vlan <ID>| IFNAME}
<value_reduced>
no circuit-failover

28.3 IPv6 VRRPv3 Configuration Commands

28.3.1 advertisement-interval

Command：advertisement-interval <adver_interval>
Configure the virtual IPv6 address and
interface of VRRPv3, the no operation of
this command will delete the virtual IPv6
address and interface
Explanation
Enable the virtual router
Disable the virtual router
Explanation
Configure VRRPv3 preempt mode
Explanation
) Configure VRRPv3 priority
Explanation
Configure the VRRPv3 advertisement
interval (in cent seconds)
Explanation
Configure the
VRRPv3, the no
command will
interface.
590
monitor interface
operation of this
delete the monitor
of