Edge-Core ES4624-SFP Basic Management Manual page 99

number of altered variables
get-request PDUs
get-next PDUs
set-request PDUs
snmp packets output
too big errors
maximum packet size
no such name errors
bad values errors
general errors
response PDUs
trap PDUs
2.6.5.3 show snmp status
Command: show snmp status
Function: Display SNMP configuration information.
Command mode: Admin Mode
Example:
Switch#show snmp status
System Name :
System Contact :
System Location :
Trap enable
RMON enable
Community Information:
Community string: 1
Community access: Read-only
Community string: test
Community access: Read-Write
Security IP is Disabled
V1/V2c Trap Host Information:
Number of variables set by NMS.
Number of packets received by "get"
requests.
Number of packets received by "getnext"
requests.
Number of packets received by "set"
requests.
Total number of SNMP packet outputs.
Number of "Too_ big" error SNMP
packets.
Maximum length of SNMP packets.
Number of packets
non-existent MIB objects.
Number of "Bad_values" error SNMP
packets.
Number of "General_errors" error SNMP
packets.
Number of response packets sent.
Number of Trap packets sent.
99
requesting for