Edge-Core ES4624-SFP Basic Management Manual page 119

nos.img
nos.rom
Command Mode: Admin Mode
Usage Guide: This command supports command line hints,namely if the user can enter
commands in following forms: copy <filename> ftp:// or copy ftp:// <filename> and
press Enter,following hints will be provided by the system：
ftp server ip/ipv6 address [x.x.x.x]/[x:x::x:x] >
ftp username>
ftp password>
ftp filename>
Requesting for FTP server address, user name, password and file name
Examples:
（1）Save images in the FLASH to the FTP server of 2004:1:2:3::6
Switch#copy nos.img ftp://username:password@2004:1:2:3::6/ nos.img
（2）Obtain system file nos.img from the FTP server 2004:1:2:3::6
Switch#copy ftp:// username:password@2004:1:2:3::6/nos.img nos.img
（3）Save the running configuration files
Switch#copy running-config startup-config
Relevant Command: write
2.7.3.2.2.2 copy（TFTP）
Command: copy <source-url> <destination-url> [ascii | binary]
Function: Download files to the TFTP client
Parameter：<source-url> is the location of the source files or directories to be copied;
<destination-url> is the destination address to which the files or directories to be
copied;forms of <source-url> and <destination-url> vary depending on different
locations of the files or directories. ascii indicates the ASCII standard will be adopted;
binary indicates that the binary system will be adopted in the file transmission（default
transmission method）.When URL represents an TFTP address, its form should be:
tftp://{<ipaddress>|<ipv6address>|<hostname>
<ipaddress>|<ipv6address>
server/client,<hostname> is the name of the host mapping with the IPv6 address,it does
not support the file download and upload
addresses,<filename> is the name of the TFTP upload/download file.
Special keyword of the filename
Keywords
running-config startup-config command
System files
System startup files
is the IPv4
Source or destination addresses
or IPv6 address
with hosts mapping with IPv4
119
}/<filename>,amongst
of the TFTP