Edge-Core ES4624-SFP Basic Management Manual page 108

Create a view, the name is readview, including iso node but not including the iso.3 node
Switch (config)#snmp-server view readview iso include
Switch (config)#snmp-server view readview iso.3 exclude
Delete the view
Switch (config)#no snmp-server view readview
2.6.5.21 snmp-server user
Command: snmp-server user <use-string> <group-string> [{authPriv | authNoPriv}
auth {md5 | sha}
{<ipv6-num-std>|<ipv6-name>}]
no snmp-server user <user-string> [access {<num-std>|<name>}]
[ipv6-access {<ipv6-num-std>|<ipv6-name>}]
Function: Add a new user to an SNMP group; the "no" form of this command deletes this
user.
Command Mode: Global Mode.
Parameter: <user-string> is the user name containing 1-32 characters.
<group-string> is the name of the group the user belongs to, containing
1-32 characters.
authPriv use DES for the packet encryption.
authNoPriv not use DES for the packet encryption.
auth perform packet authentication
md5 packet authentication using HMAC MD5 algorithm
sha packet authentication using HMAC SHA algorithm
<word > user password,containing 8-32 character
<num-std> is the access-class number for standard numeric ACL, ranging
between 1-99;
<name> is the access-class name for standard ACL, the character string
length is ranging between 1-32;
<ipv6-num-std> is the access-class number for standard numeric IPv6 ACL,
ranging between 500-599;
<name> is the access-class name for standard IPv6 ACL, the character
string length is ranging between 1-32.
Usage Guide: If the encryption and authentication is not selected, the default settings
will be no encryption and no authentication. If the encryption is selected, the
authentication must be done. When deleting a user, if correct username and incorrect
group name is inputted, the user can still be deleted.
Example: Add a new user tester in the UserGroup with an encryption safety level and
HMAC md5 for authentication, the password is hellohello.
<word>] [access
108
{<num-std>|<name>}] [ipv6-access