Lldp Neighbors Max-Num; Lldp Toomanyneighbors; Show Lldp - Edge-Core ES4624-SFP Basic Management Manual

optional TLV represents the description of local system, such as Switch Device, Nov 15
2007 09:36:37HardWare version is 1.0.0.0SoftWare package version is
Switch_5.5.5.1BootRom version is Switch_1.6.13All rights reserved. Last reboot is cold
resetUptime is 0 weeks, 0 days, 0 hours, 25 minutes; sysCap optional TLV represents
the capability of local system, for example: it is 4 in a switch.
Example： Configure that port ethernet 1/5 of the switch carries portDesc and sysCap TLV
Switch(config)#in ethernet 1/5
Switch(Config-If-Ethernet1/5)#lldp transmit optional tlv portdesc syscap

7.3.10 lldp neighbors max-num

Command：lldp neighbors max-num <value>
no lldp neighbors max-num
Function：Set the maximum number of entries can be stored in Remote MIB.
Parameters：<value> is the configured number of entries, ranging from 5 to 500.
Default：The maximum number of entries can be stored in Remote MIB is 100.
Command Mode：Port configuration mode.
Usage Guide: The maximum number of entries can be stored in Remote MIB.
Example：Set the Remote as 200 on port ethernet 1/5 of the switch.
Switch(config)#in ethernet 1/5
Switch(Config-If-Ethernet1/5)#lldp neighbors max-num 200

7.3.11 lldp tooManyNeighbors

Command：lldp tooManyNeighbors {discard|delete}
Function：Set which operation will be done when the Remote Table is full.
Parameters： discard： discard the current message; delete： Delete the message with the
least TTL in the Remoter Table.
Default: Discard.
Command Mode：Port configuration mode.
Usage Guide: When the Remote MIB is full, Discard means to discard the received
message; Delete means to the message with the least TTL in the Remoter Table.
Example：Set port ethernet 1/5 of the switch as delete
Switch(config)#in ethernet 1/5
Switch(Config-If-Ethernet1/5)#lldp tooManyNeighbors delete

7.3.12 show lldp

232