Dhcp V 6 Snooping Configuration Task Sequence; Commands For Dhcpv6 Snooping; Clear Ipv6 Dhcp Snooping Binding - Edge-Core ES4624-SFP Basic Management Manual

Command
Port mode
ipv6 dhcp snooping
user-control
no ipv6 dhcp snooping binding
user-control
11. Enable the debug switch
Command
Admin mode
debug ipv6 dhcp
packet
debug ipv6 dhcp snooping event
debug ipv6 dhcp
binding
12. Show the configuration status
Command
Admin mode
show ipv6 dhcp
interface [ethernet | port-channel]
<ifname>
show ipv6 dhcp
binding {<MAC> | <ipv6address>
| interface
port-channel] <ifname> | all}

33.3 Commands for DHCPv6 Snooping

33.3.1 clear ipv6 dhcp snooping binding

Command: clear ipv6 dhcp snooping binding {<MAC> | <ipv6 address> | interface
{ethernet <IFNAME> | port-channel <IFNAME> | <IFNAME>} | all}
Function: Clear DHCPv6 Snooping binding.
Parameter: MAC: Delete the binding of the specific MAC address
Explanation
binding
Enable or disable the user access control
function is bound by DHCPv6 Snooping.
Explanation
snooping
Enable the debug of DHCP Snooping.
snooping
Explanation
snooping
Show
snooping
information.
[ethernet |
DHCP Snooping
659
and binding