Cluster Administration Troubleshooting - Edge-Core ES4624-SFP Basic Management Manual

Hide thumbs Also See for ES4624-SFP:

Table of Contents

Default：None.

Command Mode：Admin Mode

Usage Guide ： Enable the debug information of cluster messages. After enabling

classification, all DP, DR and CP messages sent or received in the cluster will be printed.

Example：Enable the debug information of receiving DP messages.

Switch#debug cluster packets DP receive

30.5.2 Cluster Administration Troubleshooting

When encountering problems in applying the cluster admin, please check the following

possible causes

If the command switch is correctly configured and the auto adding function (cluster

auto-add) is enabled. If the ports connected the command switch and member

switch belongs to the cluster vlan.

Whether the connection between the command switch and the member switch is

correct. We can use the debug command to check if the command and the member

switches can receive and process related cluster admin packets correctly.