Clock Summer-Time Recurring - Edge-Core ES4624-SFP Basic Management Manual

the format is hour (from 0 to 23):minute (from 0 to 59); <MM.DD> is the start date, the
format is month(from 1 to 12).date(from 1 to 31); <HH:MM> is the end time, the format is
hour(from 0 to 23):minute(from 0 to 59); <MM.DD> is the end date, the format is
month(from 1 to 12).date(from 1 to 31); <offset> is the time offset, the range from 1 to
1440, unit is minute, default value is 60 minutes.
Default: There is no summer time range.
Command Mode: Global Mode
Usage Guide: This command sets the start and the end time for the recurrent summer
time. When the system time reaches to the start time point of summer time, the clock is
changed and increase <offset> value, the system enters summer time. When the system
time reaches to the end time point of summer time, the clock is changed again, subtract
<offset> value from system time, the system finishes summer time. There is no relation
between the recurrent summer time to the year, the system clock will be changed when it
reaches to the start and the end time point of summer time year after year. This
command supports the summer time of southern hemisphere.
Example: Configure the time range of summer time at 12:10 from april 6th to augest 6th
year after year, offset value as 70 minutes, summer time is named as aaa.
Switch(config)# clock summer-time aaa recurring 12:10 4.6 12:10 8.6 70

35.3.3 clock summer-time recurring

Command: clock summer-time <word> recurring <HH:MM> <week> <day>
<month> < HH:MM > <week> <day> <month> [<offset>]
no clock summer-time
Function: Configure the recurrent summer time range, the time in this range is summer
time.
Parameter: <word> is the time zone name of summer time; <HH:MM> is the start time,
the format is hour(from 0 to 23):minute(from 0 to 59); <week> is the week from 1 to 4,
first or last; <day> is the week value, the value as "Sun", "Mon", "Tue", "Wed", "Thu", "Fri",
"Sat"; <month> is the month, the value as "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul",
"Aug", "Sep", "Oct", "Nov", "Dec"; <HH:MM> is the end time, the format is hour(from 0 to
23):minute(from 0 to 59); <week> is the week from 1 to 4, first or last; <day> is the week
value, the value as "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"; <month> is the month,
the value as "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov",
"Dec" <offset> is the time offset, the range from 1 to 1440, unit is minute, default value is
60 minutes.
Default: There is no summer time range.
Command Mode: Global Mode
685