Edge-Core ES4624-SFP Basic Management Manual page 96

{<ipv6-num-std>|<ipv6-name>}]
3. Configure IP address of SNMP management base
Command
snmp-server
{<ipv4-address>| <ipv6-address>}
no snmp-server
{<ipv4-address>| <ipv6-address>}
snmp-server SecurityIP enable
snmp-server SecurityIP disable
4. Configure engine ID
Command
snmp-server engineid < engine-string >
no snmp-server engineid
5. Configure user
Command
snmp-server user
<group-string> [{authPriv | authNoPriv}
auth {md5 | sha} <word>] [access
{<num-std>|<name>}]
{<ipv6-num-std>|<ipv6-name>}]
no snmp-server user <WORD> [access
{<num-std>|<name>}]
{<ipv6-num-std>|<ipv6-name>}]
6. Configure group
Command
snmp-server group
{noauthnopriv|authnopriv|authpriv}
[[read <read-string>]
<write-string>] [notify <notify-string>]]
[access {<num-std>|<name>}]
[ipv6-access
{<ipv6-num-std>|<ipv6-name>}]
no snmp-server group <group-string>
{noauthnopriv|authnopriv|authpriv}
[access {<num-std>|<name>}]
Explanation
Configure the secure IPv4/IPv6 address
securityip
which is allowed to access the switch on
the NMS; the "no snmp-server securityip
securityip
{<ipv4-address>
<ipv6-address>}"
configured secure address.
Enable or disable secure IP address check
function on the NMS.
Explanation
Configure the local engine ID on the
switch. This command is used for SNMP
v3.
Explanation
Add a user to a SNMP group. This
<use-string>
command is used to configure USM for
SNMP v3.
[ipv6-access
[ipv6-access
Explanation
Set the group information on the switch.
<group-string>
This command is used to configure VACM
for SNMP v3.
[write
96
command deletes
|