Edge-Core ES4624-SFP Basic Management Manual page 85

power after a specified period of time, usually when updating the switch version. The
switch can be rebooted after a period of time instead of immediately after its version
being updated successfully. This command will not be reserved, which means that it only
has one-time effect. After this command is configured, it will prompt the reboot
information when user logging in the switch by telnet.
Example: Set the switch to automatically reload after 2 days, 10 hours and 1 second.
Switch#reload after 10:00:01 days 2
Process with reboot after? [Y/N] y
Related Commands: reload, reload cancel, show reload
2.3.3.2 reload cancel
Command：reload cancel
Function: Cancel the specified time period to reload the switch.
Parameters：None
Command Mode：Admin mode.
Usage Guide：With this command, users can cancel the specified time period to reload
the switch, that is, to cancel the configuration of command "reload after". This command
will not be reserved.
Example: Prevent the switch to automatically reboot after the specified time.
Switch#reload cancel
Reload cancel successful.
Related Commands：reload, reload after, show reload
2.3.3.3 show reload
Command：show reload
Function：Display the user's configuration of command "reload after".
Parameters：None.
Command Mode：Admin mode.
Usage Guide： With this command, users can view the configuration of command " reload
after" and check how long a time is left before rebooting the switch.
Example：view the configuration of command "reload after". In the following case, the
user set the switch to be rebooted in 10 hours and 1 second, and there are still 9 hours
59 minutes and 48 seconds left before rebooting it.
Switch#show reload
The original reload after configuration is 10:00:01.
System will be rebooted after 09:59:48 from now.
Related Commands：reload, reload after, reload cancel
85