Edge-Core ES4624-SFP Basic Management Manual page 190

3.2.3.2.1 duplex
Command: duplex {auto| full| half }
Function: Sets network management port duplex mode
Parameters: auto for auto-negotiation full-duplex mode; full for forced full-duplex mode;
half for forced half-duplex mode.
Command mode: Network management port configuration Mode
Default: The default duplex mode is set to auto-negotiation.
Usage Guide: According to IEEE 802.3, the auto-negotiation for port speed and duplex
are linked. If the duplex setting of the port is auto-negotiation, the port speed will be set to
auto-negotiation automatically; if the port duplex mode changes from auto-negotiation to
forced full/half-duplex, the port speed will also become forced mode, the forced speed
will be the port speed before this command.
It is strongly recommended for the users to set all port speed and duplex mode to
auto-negotiation, this can minimize protocol-related connection problems. If forced
speed/duplex mode needs to be set, the speed/duplex mode setting of both ends must
be verified to be the same.
Example: Setting the network management port to forced full-duplex mode.
Switch(config)#interface ethernet 0
Switch(Config-If-Ethernet0)#duplex full
3.2.3.2.2 interface ethernet
Command: interface ethernet <interface-name>
Function: Enters network management port configuration mode from Global Mode.
Parameters: <interface-name> stands for port number, the default value is 0.
Command mode: Global Mode
Usage Guide: Run the exit command to exit the network management Port mode to
Global Mode.
Example: Entering network management port mode.
Switch(config)#interface ethernet 0
Switch(Config-If-Ethernet0)#
3.2.3.2.3 ip address
Command: ip address <ip-address> <mask>
no ip address [<ip-address> <mask>]
Function: Sets the IP address and mask for the switch; the "no ip address
[<ip-address> <mask>]" command deletes the specified IP address setting.
Parameters: <ip-address> is the IP address in decimal format; <mask> is the subnet
mask in decimal format.
Command mode: Network management port configuration Mode
190