Edge-Core ES4624-SFP Basic Management Manual page 293

required to ensure the resource for other members of the department to access VLAN
100. Assume one of the members is M, the MAC address of his PC is 00-03-0f-11-22-33,
when M moves to VLAN200 or VLAN300, the port connecting M is configured as Hybrid
mode and belongs to VLAN100 with untag mode. In this way, the data of VLAN100 will
be forwarded to the port connecting M, and implement the communication requirement in
VLAN100.
Figure 9-7 Typical topology application of dynamic VLAN
Configuration
Items
MAC-based
VLAN
For example, M at E1/1 of SwitchA, then the configuration procedures are as follows:
Switch A, Switch B, Switch C:
SwitchA(Config)#mac-vlan mac 00-03 -0f-11-22-33 vlan 100 priority 0
SwitchA(Config)#interface ethernet 1/1
SwitchA(Config-Ethernet1/1)#swportport mode hybrid
SwitchA(Config-Ethernet1/1)#swportport hybrid allowed vlan 100 untagged
SwitchB(Config)#mac-vlan mac 00-03-0f-11-22-33 vlan 100 priority 0
SwitchB(Config)#exit
SwitchB#
SwitchC(Config)#mac-vlan mac 00-03-0f-11-22-33 vlan 100 priority 0
Configuration Explanation
Global configuration on Switch A, Switch B, Switch C.
293