Edge-Core ES4624-SFP Basic Management Manual page 459

Hide thumbs Also See for ES4624-SFP:
Table of Contents

Advertisement

The edge switch is Switch2. The interface connected to the trunk switch which is
Switch1, is configured as the prefix delegation client. The interfaces connected to hosts,
are configured as stateless DHCPv6 servers to provide the hosts with stateless
information such as DNS and domain names. Also routing advertisement of stateless
address allocation is enabled for the host interfaces. On Switch1, the prefix delegation
server is configured, and routing advertisement of stateful adderss allocation is enabled.
On the host side, DHCPv6 client capable operating system such Windows Vista should
be installed.
Usage guide:
Switch1 configuration
Switch1>enable
Switch1#config
Switch1(config)#interface vlan 2
Switch1(Config-if-Vlan2)#ipv6 address 2001:da8:1100::1/64
Switch1(Config-if-Vlan2)#exit
Switch1(config)#service dhcpv6
Switch1(config)#ipv6 local pool client-prefix-pool 2001:da8:1800::/40 48
Switch1(config)#ipv6 dhcp pool dhcp-pool
Switch1(dhcpv6-dhcp-pool-config)#prefix-delegation pool client-prefix-pool 1800 600
Switch1(dhcpv6-dhcp-pool-config)#exit
Switch1(config)#interface vlan 2
Switch1(Config-if-Vlan2)#ipv6 dhcp server dhcp-pool
Switch1(Config-if-Vlan2)#exit
Switch2 configuration
Switch2>enable
Switch2#config
459

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es4626-sfp

Table of Contents