Example: Globally enable MRPP
Switch(config)#mrpp enable
29.3.8 mrpp poll-time
Command: mrpp poll-time <20-2000>
Function: Configure the query interval of MRPP.
Command mode: Global mode.
Usage Guide: Configure the query time to adjust the query interval of MRPP, the default
interval is 100ms.
Example: Set the query time as 200ms.
Switch(Config)# mrpp poll-time 200
29.3.9 mrpp ring
Command:mrpp ring <INT>
no mrpp ring <INT>
Function: Create MRPP ring, and access MRPP ring mode, the"no mrpp ring<INT>"
command deletes configured MRPP ring.
Parameter: <INT> is MRPP ring ID, the valid range is from 1 to 4096
Command Mode: Global Mode
Usage Guide: If this MRPP ring doesn't exist itcreate new MRPP ring when executing
the command, and then it enter MRPP ring mode. It needs to ensure disable this MRPP
ring when executing the "no mrpp ring" command.
Switch(config)# mrpp ring 100
29.3.10 node-mode
Command: node-mode {maser|transit}
Function: Configure the type of the node to primary node or secondary node.
Parameter:
Command Mode: MRPP ring mode
Default: Default the node mode is secondary node.
Usage Guide:
Example: Configure the switch to primary node. MRPP ring 4000
Switch(config)# mrpp ring 4000
Switch(mrpp-ring-4000)#node-mode master
606