Edge-Core ES4624-SFP Basic Management Manual page 267

PC1 connects to the interface Ethernet 1/7 of SwitchB, PC2 connects to the interface
Ethernet 1/9 of SwitchB, Ethernet 1/10 of SwitchA connect to Ethernet 1/10 of SwitchB.
It is required that PC1 and PC2 can not mutually access due to reason of the
security, but PC1 and PC2 can access other network resources through the gateway
SwitchA. We can implement this status through Hybrid port.
Configuration items are as follows:
Port
Port 1/10 of Switch A
Port 1/10 of Switch B
Port 1/7 of Switch B
Port 1/9 of Switch B
The configuration steps are listed below:
internet
Switch A
Switch B
PC1
Fig 9-3 Typical Application of Hybrid Port
Type PVID
Access 10
Hybrid 10
Hybrid 7
Hybrid 9
267
PC2
the VLANs are allowed to pass
Allow the packets of VLAN 10 to pass
with untag method.
Allow the packets of VLAN 7, 9, 10 to
pass with untag method.
Allow the packets of VLAN 7, 10 to
pass with untag method.
Allow the packets of VLAN 9, 10 to
pass with untag method.