Edge-Core ES4624-SFP Basic Management Manual page 44

Usage Guide：This command can only be applied to the active main control boardcard,
Users have to configure the first and second img files used in the next booting of the
standby main control card by specifying the slot number, and can only use .img files
stored in the standby main control boardcard.
Example：Set flash:/nos.img as the second booting IMG file used in the next booting of
the standby main control boardcard whose slot number is m2.
Switch#boot img slot-m2#flash:/nos.img backup
2.1.1.9 boot startup-config
Command：boot startup-config { NULL | <file-url> }
Function：Configure the CGF file used in the next booting of the main control boardcard.
Parameters：The NULL keyword means to use the factory original configuration as the
next booting configuration. Setting the he CGF file used in the next booting as NULL
equals to implementing "set default" and "write". <file-url> is the full path of CGF file
used in the next booting.
1. The file path comprises of three parts: device prefix used as the root directory
(flash:/), sub-directory, and the file name. No space is allowed in each part or between
two parts.
2. The suffix of all file names should be .cfg.
3. The length of the full file path should be no longer than 128 characters, while the
file name no longer than 80 characters.
4. If the format begins with "[ slot-<slot-ID># ]flash:", the <slot-ID> in which is the
logic slot number of the main control boardcard. Otherwise, the configuration is applied to
the currently active main control boardcard.
Command Mode：Admin Mode.
Default Settings：None.
Usage Guide：This command can only be applied to the active main control boardcard,
Users have to configure the CFG file used in the next booting of the standby main control
card by specifying the slot number, and can only use .cfg files stored in the standby main
control boardcard.
Example：Set flash:/ startup.cfg as the CFG file used in the next booting of the main
control boardcard whose slot number is m1.
Switch#boot startup-config slot-m1#flash:/ startup.cfg
2.1.1.10 calendar set
Command: calendar set <HH> <MM> <SS> {<DD> <MON> <YYYY> | <MON> <DD>
<YYYY>}
Function: Set system date and time.
44