Configuration Syntax - Edge-Core ES4624-SFP Basic Management Manual

Mode.
Type router
OSPF
Routing ospf
command
Protocol
under
Global
Mode.
1.2.2.8 ACL Mode
ACL type Entry
Type
Standard IP
ACL Mode access-list ip
command
under
Mode.
Type
Extended IP
ACL Mode access-list ip
command
under
Mode.

1.2.3 Configuration Syntax

ES4624-SFP/ES4626-SFP Switch provides various configuration commands.
Although all the commands are different, they all abide by the syntax for
ES4624-SFP/ES4626-SFP Switch configuration commands. The general commands
format of ES4624-SFP/ES4626-SFP Switch is shown below:
cmdtxt <variable> { enum1 | ... | enumN } [option]
Conventions: cmdtxt in bold font indicates a command keyword; <variable> indicates a
variable parameter; {enum1 | ... | enumN } indicates a mandatory parameter that should
be selected from the parameter set enum1~enumN; and the square bracket ([ ]) in
[option] indicate an optional parameter. There may be combinations of "< >", "{ }" and
"[ ]" in the command line, such as [<variable>],{enum1 <variable>| enum2}, [option1
[option2]], etc.
Switch(Config-Router-Ospf)#
Prompt
Switch(Config-Std-Nacl-a)
#
Global
Switch(Config-Ext-Nacl-b)
#
Global
34
Mode.
Configure Use
OSPF "exit"
protocol command to
parameters. return
Global
Mode.
Operates Exit
Configure Use the "exit"
parameters command to
for return
Standard Global Mode.
IP ACL
Mode
Configure Use the "exit"
parameters command to
for return
Extended Global Mode.
IP ACL
Mode
the
to
to
to