Sntp Poll; Debug Sntp - Edge-Core ES4624-SFP Basic Management Manual

vlan no: Virtual LAN number, ranging from 1 to 4094
loopback: Configure loopback interface
loopback no: Loopback identifier, ranging from 1 to 1024
version: Configure the version for the server
version_no: Version number, ranging from 1 to 4, the default is 4
Default: Do not configure the time server.
Command Mode: Global mode
Usage Guide: None.
Example:
Configure the time server address as 1.1.1.1, specify the interface of the source address
as vlan1:
Switch(config)#sntp server 1.1.1.1 source vlan 1
Delete the time server that the address is 1.1.1.1, the interface of the specified source
address is vlan1:
Switch(config)#no sntp server 1.1.1.1 source vlan 1

18.2.3 sntp poll

Command: sntp poll <poll_interval>
no sntp poll
Function: Sets the interval for SNTP clients to send requests to NTP/SNTP; the "no
sntp poll" command cancels the polltime sets and restores the default setting.
Parameters: <poll_interval> is the interval value from 16 to 16284.
Default: The default polltime is 64 seconds.
Command mode: Global Mode
Example: Setting the client to send request to the server every 128 seconds.
Switch#config
Switch(config)#sntp poll 128

18.2.4 debug sntp

Command: debug sntp {adjust | packet | select }
no debug sntp {adjust | packet | select}
Function: Displays or disables SNTP debug information.
Parameters: adjust stands for SNTP clock adjustment information; packet for SNTP
packets, select for SNTP clock selection.
Command mode: Admin Mode
501