Commands For Vrrp; Advertisement-Interval - Edge-Core ES4624-SFP Basic Management Manual

Command
Port mode
ip vrrp authentication string <string>
no ip vrrp authentication string
5. Configure VRRP Sub-parameters
(1) Configure the preemptive mode for VRRP
Command
VRRP protocol configuration mode
preempt-mode {true| false}
(2) Configure VRRP priority
Command
VRRP protocol configuration mode
priority < priority >
(3) Configure VRRP Timer intervals
Command
VRRP protocol configuration mode
advertisement-interval <time>
(4) Configure VRRP interface monitor
Command
VRRP protocol configuration mode
circuit-failover {IFNAME | Vlan <ID>}
<value_reduced>
no circuit-failover

27.3 Commands for VRRP

27.3.1 advertisement-interval

Explanation
Configures the
strings for VRRP packets sending on the
interface, the "no ip vrrp authentication
command
string"
authentication string.
Explanation
Configures the preemptive mode for
VRRP
Explanation
Configures VRRP priority
Explanation
Configures VRRP
seconds)
Explanation
Configures VRRP interface monitor, the
"no circuit-failover" removes monitor to
the interface
575
simple authentication
removes the
timer value (in