Edge-Core ES4624-SFP Basic Management Manual page 506

Command
Global Mode
ntp server {<ip-address>|<ipv6-address>}
[version <version_no>] [key <key-id>]
no ntp server
<ipv6-address>}
3. To configure the max number of broadcast or multicast servers supported by the
NTP client
Command
Global Mode
ntp broadcast server count <number>
no ntp broadcast server count
4. To configure time zone
Command
Global Mode
clock timezone WORD {add | subtract} <0-23>
[<0-59>]
no clock timezone WORD
5. To configure NTP access control list
Command
Global Mode
ntp access-group server <acl>
no ntp access-group server <acl>
6. To configure NTP authentication
Command
Global Mode
{<ip-address> |
Explication
Set the max number of broadcast or
multicast servers supported by the NTP
client. The no operation will cancel the
configuration and restore the default
value.
506
Notes
To enable the specified time
server of time source.
Notes
This command
timezone in global mode, the no
command deletes the configured
timezone.
Notes
To configure NTP server access
control list.
Notes
configures