Edge-Core ES4624-SFP Basic Management Manual page 62

<privilege>] [password
<password>]
no username <username>
authenticaion securityip <ip-addr>
no authentication securityip <ip-addr>
authenticaion securityipv6 <ipv6-addr>
no authentication
<ipv6-addr>
authentication line {console | vty | web}
login {local|radius|tacacs}
no authentication line {console | vty |
web} login
authentication
{<num-std>|<name>}
no authentication ip access-class
authentication ipv6
{<num-std>|<name>}
no authentication ipv6 access-class
authorization line {console | vty | web}
exec {local | radius | tacacs}
no authorization line {console | vty |
web} exec
Admin Mode
terminal monitor
no terminal monitor
2. Telnet to a remote host from the switch
Command
Admin Mode
telnet [vrf <vrf-name>]
<ipv6-addr> | host <hostname>} [<port>]
[0|7]
securityipv6
ip access-class
access-class
{<ip-addr>|
the telnet. The no form command
delete the authorized telnet user. The
command privilege of the Telnet user
must set to 15.
Configure the secure IP address to
login to the switch through Telnet: the
"no" form command
authorized Telnet secure address.
Configure the remote Login authorized
style.
Binding standard IP ACL protocol to
login with Telnet/SSH/Web; the no
form command will cancel the binding
ACL.
Binding standard IPv6 ACL protocol to
login with Telnet/SSH/Web; the no
form command will cancel the binding
ACL.
Configure the telnet
mode.
Display debug information for Telnet
client login to the switch; the "no
command
monitor"
debug information.
Explanation
Login to a remote host with the
Telnet client included in the switch.
62
deletes the
authorization
disables the