Commands For Debugging And Diagnosis For Packets Received And Sent By Cpu - Edge-Core ES4624-SFP Basic Management Manual

2.4.3 Commands for debugging and diagnosis for packets
received and sent by CPU
2.4.3.1 cpu-rx-ratelimit total
Command: cpu-rx-ratelimit total <packets>
no cpu-rx-ratelimit total
Function: Set the total rate of the CPU receiving packets, the "no cpu-rx-ratelimit total"
command set the total rate of the CPU receiving packets to default.
Parameter:<packets> is the max number of CPU receiving packets per second.
Command Mode: Global Mode
Default:1200pps.
Usage Guide:The total rate set by the command have an effect on CPU receiving
packets, so it is supposed to be used with the help of the technical support..
Example:Set the total rate of the CPU receive packets to 1500pps.
Switch(config)#cpu-rx-ratelimit total 1500
2.4.3.2 cpu-rx-ratelimit queue-length
Command: cpu-rx-ratelimit queue-length <queue-id> <qlen-value>
no cpu-rx-ratelimit queue-length <queue-id>
Function: Set the length of the specified queue, the "no cpu-rx-ratelimit queue-length
<queue-id>" command set the length to default.
Parameter: <queue-id> is the index of specified queue, the range of the queue-id is
<0-7>. <qlen-value> is the queue's length, the range of length is <0-500>pkts,0 indicates
closing the queue.
Command Mode: Global Mode
Default: Default length is 100pkts.
Usage Guide: The queue length set by this command have an effect on CPU receiving
packets, so it is supposed to be used with the help of the technical support.
Example: Set the length of queue 2 to 150pkts.
Switch(config)#cpu-rx-ratelimit queue-length 2 150
2.4.3.3 cpu-rx-ratelimit protocol
Command: cpu-rx-ratelimit protocol <protocol-type> <packets>
no cpu-rx-ratelimit protocol <protocol-type>
Function: Set the max rate of the CPU receiving packets of the protocol type, the "no
cpu-rx-ratelimit protocol <protocol-type>" command set the max rate to default.
87