Edge-Core ES4624-SFP Basic Management Manual page 49

Command mode: Global Mode
Default: The default prompt is ES4624-SFP/ES4626-SFP switch.
Usage Guide: With this command, the user can set the CLI prompt of the switch
according to their own requirements.
Example: Set the prompt to "Test".
Switch(config)#hostname Test
Test(config)#
2.1.1.23 ip host
Command: ip host <hostname> <ip_addr>
no ip host {<hostname>|all}
Function: Set the mapping relationship between the host and IP address; the "no ip
host" parameter of this command will delete the mapping.
Parameter: <hostname> is the host name, up to 64 characters are allowed; <ip_addr>
is the corresponding IP address for the host name, takes a dot decimal format; all is all of
the host name.
Command mode: Global Mode
Usage Guide: Set the association between host and IP address, which can be used in
commands like "ping <host>".
Example: Set IP address of a host with the hostname of "taiwan" to 200.121.1.1.
Switch(config)#ip host beijing 200.121.1.1
2.1.1.24 ipv6 host
Command: ipv6 host <hostname> <ipv6_addr>
no ipv6 host <hostname>
Function: Configure the mapping relationship between the IPv6 address and the host;
the "no ipv6 host <hostname>" command deletes this mapping relationship
Parameter ： <hostname> is the name of the host,containing max 64 characters;
<ipv6_addr> is the IPv6 address corresponding to the host name.
Command Mode: Global Mode
Usage Guide: Configure a fixed corresponding relationship between the host and the
IPv6 address, applicable in commands such as "traceroute6 <host>", etc.
Example: Set the IPv6 address of the host named beijing to 2001:1:2:3::1
Switch(config)#ipv6 host beijing 2001:1:2:3::1
2.1.1.25 ip http server
Command: ip http server
no ip http server
49