Edge-Core ES4624-SFP Basic Management Manual page 408

Global Mode
ip dhcp pool <name>
no ip dhcp pool <name>
(2) Configure DHCP address pool parameters
Command
DHCP Address Pool Mode
network-address <network-number>
[mask | prefix-length]
no network-address
default-router
[<address1>[<address2>[...<address
8>]]]
no default-router
dns-server
[<address1>[<address2>[...<address
8>]]]
no dns-server
domain-name <domain>
no domain-name
netbios-name-server
[<address1>[<address2>[...<address
8>]]]
no netbios-name-server
netbios-node-type
{b-node|h-node|m-node|p-node|<type
-number>}
no netbios-node-type
bootfile <filename>
no bootfile
next-server
[<address1>[<address2>[...<address
8>]]]
no
[<address1>[<address2>[...<address
8>]]]
Configure DHCP Address pool
Explanation
Configure the address scope that can be
allocated to the address pool
Configure default gateway for DHCP
clients
Configure DNS server for DHCP clients
Configure
clients; the "no domain-name" command
deletes the domain name.
Configure the address for WINS server
Configure node type for DHCP clients
Configure the file to be imported for
DHCP clients on boot up
Configure the address of the server
hosting file for importing
next-server
408
Domain name for DHCP