Edge-Core ES4624-SFP Basic Management Manual page 322

Command
Port Mode
spanning-tree cost
no spanning-tree cost
spanning-tree port-priority
no spanning-tree port-priority
spanning-tree rootguard
no spanning-tree rootguard
Global Mode
spanning-tree
<tx-hold-count-value>
no spanning-tree transmit-hold-count
8. Configure the snooping attribute of authentication key
Command
Port Mode
spanning-tree digest-snooping
no spanning-tree digest-snooping
9. Configure the FLUSH mode once topology changes
Command
Global Mode
spanning-tree tcflush {enable| disable|
protect}
no spanning-tree tcflush
Port Mode
spanning-tree tcflush {enable| disable|
protect}
no spanning-tree tcflush
transmit-hold-count
322
Explanation
Set the port path cost.
Set the port priority.
Set the port is root port.
Set the max transmit-hold-count of
port.
Explanation
Set the port to use the authentication
string of partner port. The no
command restores
generated string.
Explanation
Enable: the spanning-tree flush once
the topology changes.
Disable: the spanning tree don't flush
when the topology changes.
Protect: the spanning-tree flush not
more than one time every ten
seconds.
The no command restores to default
setting, enable flush
topology changes.
Configure the port flush mode.
The no command restores to use the
global configured flush mode.
to use the
once the