Command Mode: Admin Mode.
Usage Guide: Statistics about the DHCPv6 server can be displayed though the
command show ipv6 dhcp server statistics. And these statistics can be reset with this
command.
Example: To reset DHCPv6 Server counter.
Switch#clear ipv6 dhcp server statistics
Relative Command:show ipv6 dhcp server statistics
15.6.3 debug ipv6 dhcp client
Command:debug ipv6 dhcp client { event | packet }
no debug ipv6 dhcp client { event | packet }
Function: To enable the debugging messages for protocol packets of DHCPv6 prefix
delegation client. The no form of this command will disable the debugging information.
Default: Disabled.
Command Mode: Admin Mode.
Example: To enable the debugging messages.
Switch#debug ipv6 dhcp client packet
15.6.4 debug ipv6 dhcp detail
Command:debug ipv6 dhcp detail
no debug ipv6 dhcp detail
Function: To display the debug information of all kinds of packets received or sent by
DHCPv6, the no form of this command disabled this function.
Default: Disabled.
Command Mode: Admin Mode.
Example:
Switch#debug ipv6 dhcp detail
15.6.5 debug ipv6 dhcp relay packet
Command:debug ipv6 dhcp relay packet
no debug ipv6 dhcp relay packet
Function: To enable the debugging information for protocol packets of DHCPv6 relay.
The no form of this command will disable the debugging.
Default: Disabled.
Command Mode: Admin Mode.
441