Dhcp Server Configuration; Dhcp Sever Configuration Task List - Edge-Core ES4624-SFP Basic Management Manual

Hide thumbs Also See for ES4624-SFP:

Table of Contents

be sent to the client by the server. In this case, a DHCP relay is required to forward such

DHCP packets so that the DHCP packets exchange can be completed between the

DHCP client and server.

ES4624-SFP/ES4626-SFP switch can act as both a DHCP server and a DHCP relay.

DHCP server supports not only dynamic IP address assignment, but also manual IP

address binding (i.e. specify a specific IP address to a specified MAC address or

specified device ID over a long period. The differences and relations between dynamic IP

address allocation and manual IP address binding are: 1) IP address obtained

dynamically can be different every time; manually bound IP address will be the same all

the time. 2) The lease period of IP address obtained dynamically is the same as the lease

period of the address pool, and is limited; the lease of manually bound IP address is

theoretically endless. 3) Dynamically allocated address cannot be bound manually. 4)

Dynamic DHCP address pool can inherit the network configuration parameters of the

dynamic DHCP address pool of the related segment.

14.2 DHCP Server Configuration

Enable/Disable DHCP server

Configure DHCP Address pool

(1) Create/Delete DHCP Address pool

(2) Configure DHCP address pool parameters

(3) Configure manual DHCP address pool parameters

Enable logging for address conflicts

1. Enable/Disable DHCP server

service dhcp

no service dhcp

2. Configure DHCP Address pool

(1) Create/Delete DHCP Address pool

Enable DHCP server