Ntp Broadcast Server Count; Ntp Disable - Edge-Core ES4624-SFP Basic Management Manual

Parameter: None.
Default: Disabled.
Command Mode: Interface Configuration Mode.
Usage Guide: None.
Example: To enable the function of VLAN1 interface to receive NTP broadcast packets.
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)#ntp broadcast client

19.3.11 ntp broadcast server count

Command：ntp broadcast server count <number>
no ntp broadcast server count
Function：Set the max number of broadcast or multicast servers supported by the NTP
client. The no operation will cancel the configuration and restore the default value.
Parameters：number：1-100, the max number of broadcast servers.
Default：The default max number of broadcast servers is 50.
Command Mode: Global Mode.
Examples：Configure the max number of broadcast servers is 70 on the switch.
Switch(config)#ntp broadcast server count 70

19.3.12 ntp disable

Command: ntp disable
no ntp disable
Function: To disable the NTP function on port.
Parameter: None.
Default: To enable NTP function on all ports.
Command Mode: Interface Configuration Mode.
Usage Guide: None.
Example: To delete the NTP function on VLAN interface.
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)#ntp disable
19.3.13 ntp disable
Command: ntp disable
Function: To disable NTP function globally.
Parameter: None.
512