Command
Global mode
ipv6
nd
{bind-eui64-address
bind-non-eui64-address}
no ipv6 nd snooping policy
ipv6
nd
snooping
<ipv6-address>
<hardware-address>
<interface-name>
no
ipv6
nd
snooping
<ipv6-address>
ipv6
nd
snooping
<number>
no ipv6 nd snooping mac-binding-limit
Port mode
ipv6
nd
snooping
<binding-number>
no ipv6 nd snooping port-binding-limit
Admin mode
clear
ipv6
nd
[<interface-name>]
4. Set the trust port of the switch
Command
Global mode
ipv6 nd snooping trust
no ipv6 nd snooping trust
34.3 Commands for ND Snooping
34.3.1 clear ipv6 nd snooping binding
snooping
policy
static-binding
hardware-address
interface
static-binding
mac-binding-limit
port-binding-limit
snooping
binding
673
Explanation
Configure the dynamic binding
|
policy of ND Snooping address.
Add a static binding.
Configure the max number of IPv6
addresses that can be bound to
the same MAC address.
Set the binding number for the
ports. The binding number only
limits the dynamic binding number
of the ports, do not limit the static
binding number of the ports.
Clear all static binding of ND
Snooping.
Explanation
Set the trust port of the switch.