Chapter 4 Port Isolation Function Configuration; Introduction To Port Isolation Function; Port Isolation Function Configuration; Task Sequence Of Port Isolation - Edge-Core ES4624-SFP Basic Management Manual

Chapter 4 Port Isolation Function
Configuration

4.1 Introduction to Port Isolation Function

Port isolation is an independent port-based function working in an inter-port way,
which isolates flows of different ports from each other. With the help of port isolation,
users can isolate ports within a vlan to save vlan resources and enhance network
security. After this function is configured, the ports in a port isolation group will be
isolated from each other, while ports belonging to different isolation groups or no such
group can forward data to one another normally. No more than 16 port isolation groups
can a switch have.

4.2 Port Isolation Function Configuration

4.2.1 Task Sequence of Port Isolation

1. Create an isolate port group
2. Add Ethernet ports into the group
3. Specify the flow to be isolated
4. Display the configuration of port isolation
1. Create an isolate port group
Command
Global Mode
isolate-port group <WORD>
no isolate-port group <WORD>
2. Add Ethernet ports into the group
Command
Global Mode
Explanation
Set a port isolation group; the no operation
of this command will delete the port
isolation group.
Explanation
200