Edge-Core ES4624-SFP Basic Management Manual page 106

Command: snmp-server group <group-string> {NoauthNopriv|AuthNopriv|AuthPriv}
[[read <read-string>] [write <write-string>] [notify <notify-string>]] [access
{<num-std>|<name>}] [ipv6-access {<ipv6-num-std>|<ipv6-name>}]
no
{NoauthNopriv|AuthNopriv|AuthPriv} [access {<num-std>|<name>}] [ipv6-access
{<ipv6-num-std>|<ipv6-name>}]
Function: This command is used to configure a new group; the "no" form of this
command deletes this group.
Command Mode: Global Mode
Parameter：<group-string > group name which includes 1-32 characters
NoauthNopriv Applies the non recognizing and non encrypting safety level
AuthNopriv Applies the recognizing but non encrypting safety level
AuthPriv Applies the recognizing and encrypting safety level
Name of readable view which includes 1-32 characters
Name of writable view which includes 1-32 characters
Name of trappable view which includes 1-32 characters
<num-std> is the access-class number for standard numeric ACL, ranging between
1-99;
<name> is the access-class name for standard ACL, the character string length is
ranging between 1-32;
<ipv6-num-std> is the access-class number for standard numeric IPv6 ACL, ranging
between 500-599;
<name> is the access-class name for standard IPv6 ACL, the character string length is
ranging between 1-32.
Usage Guide: There is a default view "v1defaultviewname" in the system. It is
recommended to use this view as the view name of the notification. If the read or write
view name is empty, corresponding operation will be disabled.
Example: Create a group CompanyGroup, with the safety level of recognizing
andencrypting, the read viewname isreadview, and the writing is disabled.
Switch (config)#snmp-server group CompanyGroup AuthPriv read readview
deletet group
Switch (config)#no snmp-server group CompanyGroup AuthPriv
2.6.5.18 snmp-server SecurityIP enable
Command: snmp-server SecurityIP enable
snmp-server SecurityIP disable
Function: Enable/disable the safety IP address authentication on NMS manage station
Command Mode: Global Mode
snmp-server
106
group <group-string>