Edge-Core ES4624-SFP Basic Management Manual page 81

Command Mode: Admin Mode
Default: No parameter specified indicates all the critical log information will be displayed.
Usage Guide: Warning and critical log information is saved in the buffer zone. When
displayed to the terminal, their display format should be: index ID
ID [mission name] log information.
2.2.9.2.2.2 show logging executed-commands state
Command: show logging executed-commands state
Function: Show the state of logging executed-commands.
Parameter: None.
Command Mode: Admin mode.
Default: None.
Usage Guide: Using this command to display the state (enable or disable).
Example:
Switch#show logging executed-commands state
Logging executed command state is enable
2.2.9.2.2.3 show logging source mstp
Command: show logging source mstp
Function: Show the log information source of MSTP module.
Parameters: None.
Default: None.
Command mode: Admin and configuration mode.
Usage Guide: Check the log information source (include information channel, the
information severity level) by show logging mstp command.
Example: Show the log information source of MSTP.
Switch#show logging source mstp
system module log switch status:
Channel Onoff
logbuff on
loghost on
terminal on
2.2.9.2.2.4 clear logging
Command: clear logging { sdram | nvram }
Function: This command is used to clear all the information in the log buffer zone.
Command Mode:Admin Mode
Severity
warning
warning
warning
81
time <level> module