Ip Igmp Snooping Vlan Query-Robustness; Ip Igmp Snooping Vlan Report Source-Address - Edge-Core ES4624-SFP Basic Management Manual

Default: 10s
Usage Guide:It is recommended to use the default settings. Please keep this configure
in accordance with IGMP configuration as possible if layer 3 IGMP is running.
Example: Switch(config)#ip igmp snooping vlan 2 query-mrsp 18

26.3.12 ip igmp snooping vlan query-robustness

Command: ip igmp snooping vlan <vlan-id> query-robustness <value>
no ip igmp snooping vlan <vlan-id> query-robustness
Function: Configure the query robustness. The "no ip igmp snooping vlan <vlan-id>
query-robustness" command restores to the default value
Parameter: vlan-id: vlan id , ranging between <1-4094>
value: ranging between <2-10>
Command Mode: Global mode
Default: 2
Usage Guide: It is recommended to use the default settings. Please keep this configure
in accordance with IGMP configuration as possible if layer 3 IGMP is running.
Example: Switch(config)#ip igmp snooping vlan 2 query- robustness 3

26.3.13 ip igmp snooping vlan report source-address

Command: ip igmp snooping vlan <vlan-id> report source-address <A.B.C.D>
no ip igmp snooping vlan <vlan-id> report source-address
Function: Configure forward report source-address for IGMP, the "no ip igmp snooping
vlan <vlan-id> report source-address" command restores the default setting.
Parameter: vlan-id: vlan id range<1-4094>
A.B.C.D：IP address, can be 0.0.0.0.
Command Mode: Global Mode
Default: Disabled
Usage Guide: Default configuration is recommended here. If IGMP snooping needs to
be configured, the source address for forwarded IGMP messages can be 0.0.0.0. If it is
required by the upstream that IGMP messages should use the same network address,
the source address of IGMP messages should be configured to be the same with
upstream.
Example:
Switch(config)#ip igmp snooping vlan 2 report source-address 10.1.1.1
565