0x077C0000 RAM OK
Loading MiniBootROM...
Attaching to file system ...
Loading nos.img ... done.
Booting......
Starting at 0x10000...
Attaching to file system ...
......
--- Performing Power-On Self Tests (POST) ---
DRAM Test....................PASS!
PCI Device 1 Test............PASS!
FLASH Test...................PASS!
FAN Test.....................PASS!
Done All Pass.
------------------ DONE ---------------------
Current time is SUN JAN 01 00:00:00 2006
......
Switch>
The user can now enter commands to manage the switch. For a detailed description
for the commands, please refer to the following chapters.
1.1.2 In-band Management
In-band management refers to the management by login to the switch using Telnet.
In-band management enables management of the switch for some devices attached to
the switch. In the case when in-band management fails due to switch configuration
changes, out-of-band management can be used for configuring and managing the switch.
1.1.3 Management Via Telnet
To manage the switch with Telnet, the following conditions should be met:
1) Switch has an IP address configured
2) The host IP address (Telnet client) and the switch's VLAN interface IP address is
in the same network segment.
25