Load-Balance; Port-Group; Port-Group Mode - Edge-Core ES4624-SFP Basic Management Manual

8.4.6 load-balance

Command: load-balance {src-mac | dst-mac | dst-src-mac | src-ip | dst-ip |
dst-src-ip}
Function: Set load-balance mode for port-group.
Parameter: src-mac performs load-balance according to the source MAC
dst-mac performs load-balance according to the destination MAC
dst-src-mac performs load-balance according to the source and destination
MAC
src-ip performs load-balance according to the source IP
dst-ip performs load-balance according to the destination IP
dst-src-ip performs load-balance according to the destination and source IP
Command mode: Aggregation port mode.
Default: Perform load-balance according to the source and destination MAC.
Usage Guide: Use port-channel to implement load-balance, user can configure the
load-balance mode according to the requirements. If the specific load-balance mode of
the command line is different with the current load-balance mode of port-group, then
modify the load-balance of port-group as the specific load-balance of command line;
otherwise return a message to notice that the current mode is already configured.
Example: Set load-balance mode of port-group.
Switch(config)#interface port-channel 1
Switch(Config-If-Port-Channel1)# load-balance src-mac

8.4.7 port-group

Command: port-group <port-group-number>
no port-group <port-group-number>
Function: Creates a port group. The no command deletes that group.
Parameters: <port-group-number> is the group number of a port channel from 1 to
128.
Default: There is no port-group.
Command mode: Global Mode
Example: Creating a port group.
Switch(config)# port-group 1
Delete a port group.
Switch(config)#no port-group 1

8.4.8 port-group mode

245