Ipv6 Nd-Security Updateprotect; Ip Arp-Security Learnprotect; Ipv6 Nd-Security Learnprotect - Edge-Core ES4624-SFP Basic Management Manual

Parameter： None.
Default： ARP table automatic update.
Command Mode： Global Mode/ Interface configuration.
Example：Switch(Config-if-Vlan1)#ip arp-security updateprotect
Switch(config)#ip arp-security updateprotect

22.3.2 ipv6 nd-security updateprotect

Command：ipv6 nd-security updateprotect
no ipv6 nd-security updateprotect
Function： Forbid ND automatic update function of IPv6 Version, the "no ipv6 nd-security
updateprotect " command re-enables ND automatic update function.
Parameter： None
Default： ND update normally
Command Mode： Global Mode/ Interface configuration
Example：Switch(Config-if-Vlan1)#ipv6 nd -security updateprotect
Switch(config)#ipv6 nd -security updateprotect

22.3.3 ip arp-security learnprotect

Command：ip arp-security learnprotect
no ip arp-security learnprotect
Function：Forbid ARP learning function of IPv4 Version, all the ARP packets will be
droped; so, the current dynamic ARP item will age out, and no new ARP item will learned,
the "no ip arp-security learnprotect " command re-enables ARP learning function.The "ip
arp-security convert" is suggested to be used before this command.
Parameter： None
Default： ARP learning enabled.
Command Mode： Global Mode/ Interface configuration
Example：Switch(Config-if-Vlan1)# ip arp-security learnprotect
Switch(config)# ip arp-security learnprotect

22.3.4 ipv6 nd-security learnprotect

Command：ipv6 nd-security learnprotect
no ipv6 nd-security learnprotect
Function：Forbid ND learning function of IPv6 Version, the "no ipv6 nd-security learning"
command re-enables ND learning function.
544