Ip Igmp Snooping Vlan Specific-Query-Mrsp; Ip Igmp Snooping Vlan Suppression-Query-Time; Ip Igmp Snooping Vlan Static-Group - Edge-Core ES4624-SFP Basic Management Manual

26.3.14 ip igmp snooping vlan specific-query-mrsp

Command: ip igmp snooping vlan <vlan-id> specific-query-mrsp <value>
no ip igmp snooping vlan <vlan-id> specific-query-mrspt
Function: Configure the maximum query response time of the specific group or source,
the no command restores the default value.
Parameters: <vlan-id>: the specific VLAN ID, the range from 1 to 4094.
<value>: the maximum query response time, unit is second, the range from
1 to 25, default value is 1.
Command Mode: Global mode
Default: Enable the function.
Usage Guide: After enable vlan snooping in global mode, input this command to
configure the maximum query response time of the specific group.
Example: Configure/cancel the specific-query-mrsp of vlan3 as 2s.
Swith(config)#ip igmp snooping vlan 3 specific-query-mrsp 2
Swith(config)#no ip igmp snooping vlan 3 specific-query-mrspt

26.3.15 ip igmp snooping vlan suppression-query-time

Command: ip igmp snooping vlan <vlan-id> suppression-query-time <value>
no ip igmp snooping vlan <vlan-id> suppression-query-time
Function: Configure the suppression query time. The "no ip igmp snooping vlan
<vlan-id> suppression-query-time" command restores to the default value
Parameter: vlan-id: vlan id , ranging between <1-4094>
value: ranging between<1-65535> seconds
Command Mode:Global mode
Default: 255s
Usage Guide: This command can only be configured on L2 general querier. The
Suppression-query-time refers to the period of suppression state in which the querier
enters when receives query from the layer 3 IGMP in the segments.
Example: Switch(config)#ip igmp snooping vlan 2 suppression-query-time 270

26.3.16 ip igmp snooping vlan static-group

Command ： ip igmp snooping vlan <vlan-id> static-group <A.B.C.D> [source
<A.B.C.D >] interface [ethernet | port-channel] <IFNAME>
no ip igmp snooping vlan <vlan-id> static-group <A.B.C.D> [source
<A.B.C.D >]interface [ethernet | port-channel] <IFNAME>
566