Edge-Core ES4624-SFP Basic Management Manual page 672

5) Clear all dynamic bindings of ND Snooping
7. Set the trust port of the switch
1. Enable or disable the monitor function of ND Snooping
Command
Global mode
ipv6 nd snooping enable
no ipv6 nd snooping enable
Port mode
ipv6 nd snooping user-control
no ipv6 nd snooping user-control
2. Configure the lifetime of ND Snooping
Command
Global mode
[no] ipv6 nd snooping max-sac-lifetime
<max-sac-lifetime>
[no] ipv6 nd snooping
<max-dad-delay>
[no] ipv6
max-dad-prepare-delay
<max-dad-prepare-delay>
3. The binding function of ND Snooping
max-dad-delay
nd snooping
672
Expalnation
Enable or disable ND Snooping
globally.
Enable or disable ND Snooping in
a port.
Explanation
Reset the binding lifetime as
<max-sac-lifetime> or 2 hours for
SAC_BOUND.
Reset the binding lifetime as
<max-dad-delay> or 1 second for
SAC_START.
Reset the binding lifetime as
<max-dad-prepare-delay> half a
second for SAC_QUERY.