Edge-Core ES4624-SFP Basic Management Manual page 290

Usage Guide: Display the ports of enabling MAC-based VLAN, the character in the
bracket indicate the ports mode, A means Access port, T means Trunk port, H means
Hybrid port.
Example: Display the ports of enabling MAC-based VLAN currently.
Switch#show mac-vlan interface
Ethernet1/1(A)
Ethernet1/3(A)
Ethernet1/5(H)
9.5.2.2.9 show protocol-vlan
Command: show portocol-vlan
Function: Display the configuration of Protocol-based VLAN on the switch.
Parameter: None.
Command Mode: Admin Mode and other configuration Mode.
Usage Guide: Display the configuration of Protocol-based VLAN on the switch.
Example: Display the configuration of the current Protocol-based VLAN.
Switch#show protocol-vlan
Protocol_Type
-----------------------------
mode ethernetii etype 0x800
mode ethernetii etype 0x860
mode snap etype 0xabc
mode llc dsap 0xac ssap 0xbd
9.5.2.2.10 show subnet-vlan
Command: show subnet-vlan
Function: Display the configuration of the IP-subnet-based VLAN on the switch.
Parameter: None.
Command Mode: Admin Mode and other configuration Mode.
Usage Guide: Display the configuration of the IP-subnet-based VLAN on the switch.
Example: Display the configuration of the current IP-subnet-based VLAN.
Switch#show subnet-vlan
IP-Address
------------------ -----------------
192.168.1.165
202.200.121.21
10.0.0.1
Ethernet1/2(A)
Ethernet1/4(A)
Ethernet1/6(T)
VLAN_ID
------------
Mask
-------
255.255.255.0
255.255.0.0
255.248.0.0
290
Priority
---------
200 4
200 4
100 5
100 5
VLAN_ID
2
2
5